Cutlet

Cutlet
Participation Information
UK Series	7, Extreme 2
Team Information
Team	Team Coyote
Team Members	Ian Lockhart Scott Lockhart Daniel Lockhart (Extreme 2)
From	Stanwick, Northamptonshire
Robot Statistics
Weight	12kg
Power	14.4v
Weapons	Flipper
Statistics correct as of its most recent show/competition appearance, or if not applicable, qualification attempt.

Cutlet (also referred to as Cut_Let) was a featherweight from Team Coyote that entered the Featherweight Competitions of Extreme 2 and Series 7. In the Extreme 2 competition, Cutlet reached the final, but in Series 7 it lost in the heats.

Versions of Cutlet

Cutlet (Extreme 2)

Cutlet in Extreme 2

In its first incarnation, it was a box-shaped robot with a front wedge that housed a small circular saw on the top of the robot. The robot was painted black, and featured exposed wheels on top, and a thick aerial. The wedge was designed to cause robots to ride up into the saw.

Cutlet (Series 7)

In its second incarnation, Cutlet was rebuilt to be narrower, longer and with protected wheels. This version was armed with a flipper, which was interchangeable with a cutting disc.

The Team

Main article: Team Coyote

Cutlet was entered into Robot Wars by the Northamptonshire-based Team Coyote, who also competed in Series 5 and 7 with Lambsy and Ewe 2. The robot was built by Ian Lockhart, while his son Scott Lockhart captained the team, and drove Cutlet in battle. Scott Lockhart's younger brother Daniel was also part of the team in the second series of Extreme only.

Robot History

Extreme 2

In the first round of the Featherweight Championship, Cutlet faced Dragon, Flybot, Gladiator, Kitty and Micro Mute.

Cutlet pushes Dragon into the pit

Cutlet missed a charge on Kitty early on, before being bashed by Micro Mute from the side. It then attempted to attack Dragon, but Dragon darted round it easily. Flybot and Kitty pitted each other, so Cutlet only needed to defeat one more robot to qualify. Dragon then rammed into the front corner of Cutlet, but this attack drove it up the wedge of Cutlet, whose saw weapon bounced Dragon up and kept its wheels off the arena floor. This allowed Cutlet to push Dragon into the pit with little resistance.

Cutlet is pitted by Gladiator

After this, Cutlet seemed to stop moving by the lip of the pit, and was pitted by Gladiator, but at this stage it had already qualified out of the battle.

"The Cutlet team, of Ian Lockheart, son Daniel and son Scott, fought on and pushed Dragon into the pit, surviving themselves to fight in the final three."

— Jonathan Pearce

By the end of the fight, all six featherweights were in the pit, and were crushed by Refbot. Nevertheless, Cutlet advanced to the final along with Gladiator and Micro Mute.

In the final, Cutlet, Gladiator and Micro Mute were joined by Argh!, Bernard and Katnip.

Cutlet nudges into the back of Gladiator

Cutlet stayed out of the thick of the action early on, nudging into the back of Gladiator as its opponent shoved Katnip into Argh!. Cutlet was then deflected off the spinning Bernard and attacked by Argh!, who scratched its side. Cutlet then managed to get under Team Reptirron's machine, but Argh!'s disc almost hit Cutlet's aerial, and it soon escaped and attacked Cutlet again, this time cutting into the rear armour.

Cutlet attacks the upended Gladiator

Cutlet then nudged into the one-wheeled Katnip and an upended Gladiator, but Gladiator was knocked away from Cutlet by a Micro Mute charge. It tussled with Gladiator once more, both machines trying to get past each other's sides as they twisted in a tight circle. Cutlet was then thrown away by the activated Floor Spinner, and just avoided a hit from Argh! in the process. However, Argh! then dug underneath Cutlet's side with its rear wedge and shoved it across the arena, before Micro Mute slid underneath the two machines and separated them.

"We're seeing Cutlet pushed away, there the very speedy Micro Mute, Cutlet under pressure from Argh!"

— Jonathan Pearce

Cutlet is immobilised by Argh!

By this point, Cutlet's saw was no longer working, and it bumped into Gladiator, before failing to push it. After receiving a light ram from Micro Mute, Cutlet was outwedged by Argh! again, and was shoved into the arena wall. This impact appeared to immobilise Cutlet, and its side armour was then shredded by Argh!'s spinner.

"I can't see too much life in Cutlet."

— Jonathan Pearce

Cutlet is almost pitted by Argh!

Cutlet was then shoved away from Refbot's count by a reverse-push from Argh!, and pieces of Cutlet's armour were torn off as Argh!'s spinner came into contact once more. Argh! could not pit Cutlet though, and when both machines finally separated after Argh! moved over the Floor Spinner, Cutlet came back to life, moving very, very slowly as cease was called. Although Cutlet survived to a judges' decision, it was Argh! who was declared the winner.

Series 7

Cutlet returned for Series 7, where it fought Alienator, Bernard once again, DTK, walkerbot Mammoth, Staglet and Typhoon Cadet.

Cutlet mistimes a flip on Mammoth early on

Cutlet began by missing a charge on Alienator, before Staglet grabbed it from the side and pushed it around briefly, with Cutlet activating its flipper as it tried to escape. After being released by Staglet, Cutlet received a hit to its side from Alienator, before it darted round the back of Mammoth. Cutlet was unable to lift Mammoth though, only being able to flick its flipper up once Mammoth walked off it. After being nudged by DTK, Cutlet was bashed by a reversing Staglet, who had Alienator in its grip. Cutlet chased after Staglet, but then changed tactics and attacked Bernard. The two machines separated, and Cutlet was hit by Alienator, before turning to fight Bernard again, missing a flip as it did so.

"Alienator, who breaks away, gets a little slam in there as well; Cutlet was involved."

— Jonathan Pearce

Cutlet attacks Bernard

After missing another flip, this time on Alienator, Cutlet dodged the pincers of Staglet, before later attacking Staglet from behind. Deflecting away, Cutlet avoided a flip from DTK, but as it attempted to flip Mammoth again, DTK attacked Cutlet, flipping it into Mammoth and turning it onto its back, and it failed to self-right.

"Ooh, Cutlet's over! They've got a little flipper to self-right, can they use it?"

— Jonathan Pearce

Cutlet is edged towards the pit by Mammoth

While DTK turned away to attack Typhoon Cadet, Cutlet was pushed very slowly towards, and eventually into, the pit by Mammoth, meaning Cutlet was the first to be eliminated in the fight. Cutlet was later joined by Staglet, Typhoon Cadet and Mammoth in the pit, while Bernard and DTK advanced to the final after a judges' decision.

Results

Wins/Losses

• Wins: 1
• Losses: 2

Series Record

Cutlet on display, armour removed, with the spinner

Main Series	Cutlet Series Record
The First Wars	Did not enter
The Second Wars	Did not enter
The Third Wars	Did not enter
The Fourth Wars	Did not enter
The Fifth Wars	Entered with Lambsy
The Sixth Wars	Failed to qualify with Lambsy
The Seventh Wars	Featherweight Championship, Round 1 Entered with Ewe 2
Series 8	Did not enter
Series 9	Did not enter
Series 10	Did not enter
Robot Wars Extreme	Appearances
Series 1	Did not enter
Series 2	Featherweight Final Entered with Lambsy

Outside Robot Wars

Cutlet as Cutlet 540

After Series 7, Cutlet was heavily modified and upgraded to Cutlet 540. This version had a full-pressure flipper and saw much success, finishing second in the 2004 Featherweight Championship. In 2007, it was sold to Team Shock, who rebuilt and renamed it Aftershock (not to be confused with their heavyweight robot).

External Links

• Cutlet on the Team Coyote Website (archived)